|
NAME config - edit the hardware
configuration
SYNOPSIS config
DESCRIPTION The config macro runs the
configuration editor program edconf for the current
spectrometer geometry. This program displays several
configuration screens. The motor screen presents all the
motor related parameters (step-size, stepping rate, limits, etc.)
as well as the current positions of all motors. The
scaler screen allows you to configure the scaler (counter)
names and mnemonics and also which hardware channel is associated
with which name. The device screen lets you select non-
CAMAC motor controllers, timer/counters and MCA-type devices.
The interface screen is used to select a CAMAC controller,
a GPIB controller, and ports for user-level serial devices and
user-level PC I/O ports. If a CAMAC device is defined, the
CAMAC screen that shows the slot configuration will become
accessible.
Help is available while running the configuration editor
using the commands ? and H.
When you exit edconf, spec rereads
the modified configuration and re-initializes the hardware
devices.
On some installations, only authorized users are able to
modify the hardware configuration.
FILES spec.d/spectro/config
spec.d/spectro/settings
DEFINITION
|
-
def config '
wait(-1)
sync
unix(sprintf("%s/edconf %s %s/%s",\
SPECD, set_sim(-1)? "-s":"", SPECD, SPEC))
reconfig
_assign
'
|
SEE ALSO
config_adm
spec Administrator's Guide
![[Help File Index]](../../images/index.gif)
... Meeting the software needs of scientists since 1985 ...
Last Formatted Feb 1, 2008
Last Updated 02/28/01
Send comments, queries, suggestions to
info@certif.com
© 1995-2003 Certified Scientific Software. All rights reserved
|
|
