CSS / Hardware Reference : National Instruments PCII GPIB on PC UNIX System V Platforms

	Welcome \| spec \| C-PLOT \| Support \| Users \| Contact


	Motors Counters MCA Interfaces

Hardware reference : Interfaces Controllers and General Input/Output : GPIB Devices : National Instruments GPIB : National Instruments PCII GPIB on PC UNIX System V Platforms

National Instruments PCII GPIB on PC UNIX System V Platforms

Manufacturer:

config file

PC_GPIBPC = device_name
PC_GPIBPC_L = device_name

edconf: INTERFACES screen

 GPIB        DEVICE   ADDR                                       <>TYPE 
  YES    /dev/gpib0                                  Nat Inst GPIB PCII 
  YES    /dev/gpib0                         Nat Inst GPIB PCII (shared)

The PCII board is an old model, but is still supported by spec . This selection uses spec 's built-in code. The cib.o file configuration described earlier may also be used.

Top