Kinetic Systems 3988 GPIB to CAMAC
Manufacturer:
config file
GP_KS3988 = gpib_address INTR|POLL
edconf:
INTERFACES screen
CAMAC DEVICE ADDR <>MODE <>TYPE
YES 7 POLL KS 3988 GPIB Crate Controller
Use this configuration for the Kinetic Systems 3988 GPIB-to-CAMAC controller.
This controller may be used in a polled or interrupt-driven mode. In
interrupt-driven mode, a CAMAC look-at-me (LAM) generates a GPIB service
request (SRQ), which in turn, will call a spec interrupt service routine.
Interrupt-driven mode is currently only available with National
Instruments GPIB controllers, and only when not using the cib.o GPIB
configuration (see below). If multiple versions of spec are sharing
the controller on the same computer, the controller must be operated
in polled mode.
|
