CSS / Hardware Reference : IOtech SCSI to GPIB on HP platforms

	Welcome \| spec \| C-PLOT \| Support \| Users \| Contact


	Motors Counters MCA Interfaces

Hardware reference : Interfaces Controllers and General Input/Output : GPIB Devices : IOtech SCSI to GPIB : IOtech SCSI to GPIB on HP platforms

IOtech SCSI to GPIB on HP platforms

Manufacturer:

IOtech

config file

PC_SICL_H = device_name

edconf: INTERFACES screen

 GPIB        DEVICE   ADDR                                     <>TYPE 
  YES  /dev/IOtech1                        IOtech SCSI488/H SICL GPIB

This configuration uses IOtech's SCSI-to-GPIB interface on an HP 700 Series workstation with the IOtech SICL software. When the spec Install script is run, the flags required to load the GPIB SICL library must be entered. Note, CSS has available a modified version of the standard libsicl.a that doesn't use the ieee488 daemon program, but does allow multiple processes to access the GPIB controller. Contact CSS to obtain the modified version of the library.

Top