DSP CC-488 GPIB to CAMAC
config file
GP_CC488 = gpib_address INTR|POLL
edconf:
INTERFACES screen
CAMAC DEVICE ADDR <>MODE <>TYPE
YES 7 POLL DSP 488 GPIB Crate Controller
This configuration is for the DSP CC-488 GPIB-to-CAMAC controller.
This controller may be used in a polled or interrupt-driven mode.
In interrupt-driven mode, a CAMAC look-at-me (LAM) generates a GPIB
service request (SRQ), which in turn, will call a spec interrupt
service routine. Interrupt-driven mode is currently only available
with National Instruments GPIB controllers. If multiple versions
of spec are sharing the controller on the same computer,
the controller must be operated in polled mode.
|
