CAMAC Controllers that use spec drivers
config file
CDEV = device_name INTR|POLL
edconf:
INTERFACES screen
CAMAC DEVICE ADDR <>MODE <>TYPE
YES /dev/ca00 INTR DSP-6001/DCC-11/KS-3912 Boards
spec drivers are available for the DSP 6001/6002 with PC004 for
PC platforms, the Kinetic Systems 3922 with 2926 for PC platforms,
or the Kinetic Systems 3912 CAMAC controller for BSD and Ultrix
platforms. The appropriate CSS driver must be installed in each case.
The PC platform controllers may be used in a polled or interrupt-driven
mode. In interrupt-driven mode, a CAMAC look-at-me (LAM) will generate
a call to a spec interrupt service routine.
To use the DSP 6001/6002 controllers in interrupt-driven mode, the
boards must be modified to give the module a software programmable
interrupt-enable capability. The modifications involve cutting four
traces and soldering four jumper wires on one of the boards in
the 6001/2 module. Contact CSS to obtain the explicit instructions.
No modifications are required to operate the controller in polled mode.
|
