Welcome | spec | C-PLOT | Support | Users | Contact
 
Contents -> Designing the Plot -> st select plot style
C-PLOT Manual


5.10. - st select plot style



selects plot style. 
    st [code]
The st command selects from several defined plot styles. The default style in both 2D and 3D mode is style 0.

In 2D mode the following styles are available:

 Code   What is drawn 
 0   All four sides 
 1   Only center lines through zero 



In 3D mode the following styles are available:

 Code   What is drawn 
 0   All six sides of the cube 
 1   Only center lines through zero 
 2   Only bottom and two back sides of the cube 
 3   Only the bottom of the cube 
 4   Only the three numbered edges 

Here are examples of the selected styles:




  Top
  Prev | Next